High rotational accuracy (0.03+6H/10000)μm is maintained for an entry level to mid-range model.
PC-based cylindricity capable Roundtest for both shop floor and laboratory environment.
Simple easy to use center and level function with mechanical mic heads on alignment table.
Accidental touch function disables the movement when the detector goes over range.
Wide variety of Graphics Functions:Analysis results such as cylindricity and coaxiality can be visually expressed in
3D graphics.
TECHNICAL SPECS 2
Customizable layouts using graphics:
The customer can create reports in custom formats by specifying how the
analysis results will be displayed, as well as the sizes and positions of graphics.
The analysis result window can be directly utilized as a layout window. Since
the measurement procedure, including the layout information, is saved, the
entire process, from measurement start, calculation, result saving, and finally to
printing, can be automatically executed.
TECHNICAL SPECS 3
Highly accurate easy to use turntable:
Equipped with highly accurate turntable that enables simple and accurate
centering and leveling of the workpiece. Operator can adjust centering and
leveling by analog micrometer heads easily using misalignments guidance.
X/Y MEASUREMENT CAPACITIES
Maximum workpiece diameter: ø22”(ø560mm)
Maximum probing diameter: ø11”(ø280mm)
Horizontal travel: 6.5”(165mm) (From table axis -1~±5.5”
((-25mm – ±140mm))
Z-AXIS MEASUREMENT CAPACITIES
Maximum probing height (ID/OD): 11.8”(300mm)*1
Maximum probing depth: 91mm (over ø32)
Vertical travel: 11.8”(300mm)
